Processing math: 100%

Trigonometric ratios of any angle

This note includes all the information of Trigonometrical ratios of angle generalized and associated with a given angle theta.

Summary

This note includes all the information of Trigonometrical ratios of angle generalized and associated with a given angle theta.

Things to Remember

Values of every trigonometric ratio in different quadrants are:

1st quadrant 2nd quadrant 3rd quadrant 4th quadrant
all the ratios are (+e) positive sin and cosec (+ve) remaining (-ve) tan and cot (+ve) remaining (-ve) cos and sec (+ve) remaining (-v)

MCQs

No MCQs found.

Subjective Questions

No subjective questions found.

Videos

No videos found.

Trigonometric ratios of any angle

Trigonometric ratios of any angle

Trigonometric ratios of all quadrants

1

Let a line OP start from OX revolve round O in the anticlockwise direction. Then it will trace positive angle XOP. If OP is in the first quadrant, then XOP lies between 0° and 90°. If OP is in the second quadrant, then XOP lies between 90° and 180°. Similarly, when OP is in the third or the fourth quadrant, then XOP lies between 180° and 270° or 270° and 360° respectively.If OP revolves in the clockwise direction, the angle traced is negative.

Rule of signs

In the above figure, lines measured along OX' or OY' are considered positive. Lines measured along OX and OY are considered negative. If PM is perpendicular to XX', then

  1. Both OM and MP are positive when OP is in the first quadrant.
  2. OM is negative and MP is positive when OP is in the second quadrant.
  3. Both OM and MP are negative when OP is in the third quadrant.
  4. OM is positive and MP is negative when OP is in the fourth quadrant.
  5. The line OP is always positive.

 Thus the values of trigonometric ratios in different quadrants are as follows:-

1st quadrant 2nd quadrant 3rd quadrant 4th quadrant
all the ratios are (+e) positive sin and cosec (+ve) remaining (-ve) tan and cot (+ve) remaining (-ve) cos and sec (+ve) remaining (-v)

Ratios of (90° - A)

Let revolving line OP start from OX and trace out an angle XOP = A. Let another line OQ (= OP) revolve from OX to OYn and return back to OQ through an angle YOQ = A.

Then XOQ = 90° - A

Draw perpendiculars PM and QN from P and Q respectively to OX.

Now, in s ONQ and OMP, OQN = MOP, ONQ OMP and OQ = OP. So, triangles ONQ and OMP are congruent.

Corresponding sides of a congruent triangle are equal.

OQ = OP, NQ = OM and ON = MP.

Now,

sin(90° - A) = NQOQ= OMOP = cos A

cos(90° - A)= ONOQ= MPOP = sin A

tan(90° - A) = NQON= OMMP = cot A

cosec(90° - A)= OQNQ= OPOM = sec A

sec(90° - A)= OQON= OPMP = cosec A

cot(90° - A)= ONNQ= MPOM = tan A

Ratios of (90° + A)

Let a revolving line OP start from OX and trace out an angle XOP = A. Let another line OQ (=OP) revolve from OX to OY and agian to OQ through an angle YOQ = A.

Then, XOQ = 90° + A

Draw perpendicular PM and QN from P and Q respectively to XOX'. In s ONQ and OMP, OQ = OP, OQN = MOP and ONQ =OMP. So, ONQ ≅OMP.

Corresponding sides of congruent triangles are equal.

So, OQ = OP, ON = MP and NQ = OM.

By the rule of signs, OQ = OP, ON = -MP and NQ = OM.

Now,

sin(90° + A) = NQOQ= OMOP = cos A

cos(90° + A)= ONOQ= MPOP = -sin A

tan(90° + A) = NQON= OMMP = -cot A

cosec(90° + A)= OQNQ= OPOM = sec A

sec(90° + A)= OQON= OPMP = -cosec A

cot(90° + A)= ONNQ= MPOM = -tan A

Ratios of (180° - A)

Let a revolving line OP start from OX and trace out an angle XOP = A. Let another line OP (= OP) revolve from OX to OX' and return to OQ through an angle X'OQ = A.

Then, XOQ = 180° - A.

Draw perpendicular PM and QN from P and Q respectively to XOX'.

In sONQ and OMP, ONQ =OMP,QON =POM and OQ = OP. So, ONQ≅ OMP.

Corresponding sides of congruent triangles are equal.

OQ = OP, ON = OM and NQ = MP.

By the rule of signs, OQ = OP, ON = -OM and NQ = MP

Now,

sin(180° - A) = NQOQ= MPOP =sin A

cos(180° - A)= ONOQ= OMOP = -cos A

tan(180° - A) = NQON= MPOM = -tan A

cosec(180° - A)= OQNQ= OPMP = cosec A

sec(180° - A)= OQON= OMOM = -sec A

cot(180° - A)= ONNQ= OMMP = -cot A

Ratios of (180° + A)

Let a revolving line OP start from OX and trace out an angle XOP = A. Let another line OQ (= OP) revolve from OX to OX' and again to OQ through an angle X'OQ = A.

Then, XOQ = 180° + A.

Draw perpendiculars PM and QN from P and Q respectively to XOX'.

In sONQ and OMP, ONQ =OMP,QON =POM and OQ = OP.

ONQ = OMP.

Corresponding sides of congruent triangles are equal.

OQ = OP, ON = OM and NQ = MP.

By the rule of signs, OQ = OP, ON = -OM and NQ = -MP.

Now,

sin(180° + A) = NQOQ= OMOP = -sin A

cos(180° + A)= ONOQ= OMOP = -cos A

tan(180° + A) = NQON= MPOM = tan A

cosec(180° + A)= OQNQ= OPMP = -cosec A

sec(180° +A)= OQON= OPOM = -sec A

cot(180° +A)= ONNQ= OMMP = cot A

Ratios of (270° - A)

Let a revolving line OP start from OX and trace out an angle XOp = A. Let another line OQ = (= OP) revolve from OX to OY' and return to OQ through an angle Y'OQ = A.

Then, XOQ = 270° - A.

Draw perpendicular PM and QN from P and Q respectively to XOX'.

In sONQ and OMP, ONQ =OMP,OQN =MOP ans OQ = OP.

ONQ ≅OMP.

Corresponding sides of congruent triangles are equal.

So, OQ = OP, ON = MP, NQ = OM

By the rule of signs, OQ= OP, ON = -MP and NQ = -OM.

Now,

sin(270° - A) = NQOQ= OMOP = -cos A

cos(270° -A)= ONOQ= MPOP = -sin A

tan(270° - A) = NQON= OMMP = cot A

cosec(270° - A)= OQNQ= OPOM = -sec A

sec(270° -A)= OQON= OPMP = -cosec A

cot(270° - A)= ONNQ= MPOM = tan A

Ratios of (270° + A)

Let s revolving

line OP start from OX and trace out an angle XOP = A. Let another line OQ = (- OP) revolve from OX to OY' and return to OQ through an angle Y'OQ = A.

Then, XOQ = 270° - A.

Draw perpendicular PM and QN from P and Q respectively to XOX'.

In sONQ and OMP, ONQ =OMP,OQN =MOP ans OQ = OP.

ONQ ≅OMP.

Corresponding sides of congruent triangles are equal.

So, OQ = OP, ON = MP, NQ = OM

By the rule of signs, OQ= OP, ON = -MP and NQ = -OM.

Now,

sin(270° +A) = NQOQ= OMOP = -cos A

cos(270° +A)= ONOQ= MPOP = sin A

tan(270° +A) = NQON= OMMP = -cot A

cosec(270° +A)= OQNQ= OPOM = -sec A

sec(270° + A)= OQON= OPMP = cosec A

cot(270° +A)= ONNQ= MPOM = -tan A

Ratios of (360° - A)

Let a revolving line OP start from OX and trace out an angle XOP = A. Let another line OQ = OP revolve from OX to OX and return back to OQ through an angle XOQ = A.

Then, XOQ = 360° - A.

Draw perpendiculars PM and QN from P and Q respectively to OX.

In sONQ and OMP, ONQ = OMP, NOQ = MOP and OQ = OP.

ONQ≅ OMP.

Corresponding sides of congruent triangles are equal.

So, OQ = OP, ON = OM and NQ = MP.

By the rule of signs, OQ = OP, ON = OM and NQ = -MP.

Now,

sin(360° - A) = NQOQ= MPOP = -sin A

cos(360° - A)= ONOQ= OMOP = cos A

tan(360° - A) = NQON= MPOM = -tan A

cosec(360° - A)= OQNQ= OPMP = -cosec A

sec(360° - A)= OQON= OPOM = sec A

cot(360° - A)= ONNQ= OMMP = -cot A

Ratios of negative angle (-A)

Let a revolving line OP start from OX and trace out an angle XOP = A. Let another line OQ = (-OP) revolve from OX to OX and return back to OQ through an angle XOQ = A.

Then XOQ = -A.

Draw perpendiculars PM and QN from P and Q respectively to OX. Then similarly, as above,

OQ = OP, ON = OM and NQ = -MP

Then,

sin(-A) = NQOQ= MPOP = -sin A

cos(-A)= ONOQ= OMOP = cos A

tan(-A) = NQON= MPOM = -tan A

cosec(-A)= OQNQ= OPMP = -cosec A

sec(-A)= OQON= OPOM = sec A

cot(-A)= ONNQ= OMMP = -cot A

 

 

Lesson

Trigonometry

Subject

Optional Mathematics

Grade

Grade 9

Recent Notes

No recent notes.

Related Notes

No related notes.